Boiler Installation: How Professionals Do it?

A boiler is an essential piece of equipment available in a household and probably one of the most expensive equipment pieces. After all, boilers increase the comfort of our homes by keeping us warm, powering the central heating system, and providing hot water for use. If you ever need boiler installation or require an emergency boiler repair service, make sure that you contact a professional plumber or a heating engineer.

When is the right time for replacing your new boiler? 

A typical gas boiler has a lifespan of 10 to 15 years. Therefore, it is better if you start saving for a new boiler installation if your old boiler is around 15 years old. A plumber or heating engineer can give you a good idea about the condition of your boiler and whether it needs to be replaced or not.

If you need to replace your old boiler, then the first step is to remove the old boiler. Contact a local plumber near you or a heating engineer to replace your old boiler with a new one for safety and convenience. You will require an engineer with a gas safety certificate to shut off the gas meter and break the gas feed before capping it to ensure that a boiler is no longer a working appliance. They will also have to isolate the boiler from the water supply by dealing with the water valves.

How to choose the right boiler for you?

It is necessary to choose the right boiler size depending on the space available in your home for a boiler, how much you use the boiler, and what sort of fuel the boiler uses. The cheapest option for a home is a typical gas boiler if your house runs off-gas from the mains grid. Consider a low carbon heater, such as a heat pump or biomass, if you do not have a gas supply in your home. The next thing to choose is whether you want to install a regular boiler or a combi boiler.

What is the difference between a Regular and Combi boiler? 

The differences between a regular and a combi boiler are that regular boilers are larger as they have a separate hot water cylinder. Combi boilers are all in one and therefore smaller in size. Regular boilers are more efficient and faster than combi boilers, so regular boiler installation is a more likely choice if you have a large family.

Boiler size is measured in kilowatts, and combi boilers are available in three sizes, 24-27kW, 28-34kW and 35-42kW. Most plumbing services suggest the required size of a boiler depending on the number of people, bathrooms, and radiators in a house. The size of the house also matters, as a more powerful boiler will be required if you have a larger home.

Boiler installations: Choosing the right professional or service!

An engineer with a gas safety certificate is required to install the boiler. The new boiler installation is typically done on the same day the old boiler is removed. This is done for convenience and time management purposes. The time and cost required to complete the boiler installation depend on the size and type of the boiler.

The heating engineer will install the boiler and connect the pipes and pumps to the cold water mains supply, water supply, and radiators. The boiler will also be connected to electrical controls. This means that you can alter the central heating of your home without going to the boiler directly.

After the boiler installation process is complete, test the boiler to ensure that it is working correctly. Wait until the boiler is cool and turn the thermostat down to zero. Then, turn the hot water off, turn the thermostat up to see if the boiler flares to life. Finally, feel the radiators after 10 minutes to ensure that the heat is steady on the top and bottom. If everything is working correctly, then it means that the boiler is installed correctly and is working efficiently.

Why is Boiler maintenance necessary?

The cost of boiler maintenance may seem like an unnecessary expense to a lot of homeowners. But it is crucial to get your boiler serviced at least once a year if you want it to last as long as possible. Annual servicing of the boiler makes sure that it is working safely and efficiently and keeps the warranty intact. In addition, faulty or broken boilers can emit carbon monoxide gas, which is extremely harmful to us even in the most minuscule amounts.

Conclusion: 

A faulty boiler can also result in an unexpected increase in electricity bills. You will require an emergency boiler repair if your boiler is faulty. Proper maintenance will most likely extend the lifespan of a boiler and reduce fuel cost by up to 10%. For better boiler maintenance you can contact us for the best maintenance care for your boiler.